9 Best Of How To Hang A Metal Garden Gate New Update 2021. Once the post is plumb use a scrap board the width of the finished gate as a spacer to keep the correct distance between both posts. Predrill and attach the hinges to the posts using lag screws.
Now your gate is securely hung onto the mounting frame we recommend closing the gate and fitting the piece of timber baton supplied with Jacksons gates onto the gate frame at the opposite side of the hinges leaving a 1mm gap between the baton and the gate to provide a rebate stopping the gate from swinging too far against the hinges once it has been fixed to the frame. With this method the gate sits between the posts but it site flush with the back of the posts and the hinge and latch are on the back of the gate so no extra gap is required to accommodate the fittings. The hinges attach on the right-hand edge if the.
Flush with the Posts.
Then place the gate onto the. Now your gate is securely hung onto the mounting frame we recommend closing the gate and fitting the piece of timber baton supplied with Jacksons gates onto the gate frame at the opposite side of the hinges leaving a 1mm gap between the baton and the gate to provide a rebate stopping the gate from swinging too far against the hinges once it has been fixed to the frame. If ļ¬tting the gate to metal posts use the self-tapping screws supplied for this. The Fitting Process In order to provide ground clearance for the gate so it can open and close freely take a piece of wood and place it.